HS-2000 temperature controller

HS-2000

Technical specification

1.Independent PV and SV displays

2.PID control with auto tuning

3.Main control output: SCR

4.Heating/cooling control.

5.Timer and temperature controller united in one unit

6.Two modes to start timer function:

A)timer starts at power on

B)timer starts when process value arrived at SV 

7. Working environment  0 ~ 50℃ ambient temperature ; 45 ~ 85% non-condensing humidity

8.Power supply  100~240VAC 50-60Hz; Consumption: 4VA

Panel introduction

① PV displaying window To show the present temperature value.

② SV displaying window To show the temperature setpoint and the time setpoint value.

The right low decimal point and the middle time mark points are blinking when timer is active.

When the time arrive, it will show "end" in this window.

③ Function key

Press set to enter LEVEL 1 and LEVEL 2 parameter menus.

④ Shift key, Shift the digit to the bit you want to set.

⑤ Down key; RESET key

Down key: count down values when you change the set point.

RESET key: when the time is up, output is cut. If the user want to restart, press this key 3 seconds.

⑥Up key; TIME key

Up key: count up the values when you change the set point

TIME key: press this key to switch the displaying of time and temperature set point.

⑦ Indicating LED lamp

OUT: light on when the output is active

ALM: light on when the alarm is active

AT : light on when the auto-tuning is active