HS-2000
Technical specification
1.Independent PV and SV displays
2.PID control with auto tuning
3.Main control output: SCR
4.Heating/cooling control.
5.Timer and temperature controller united in one unit
6.Two modes to start timer function:
A)timer starts at power on
B)timer starts when process value arrived at SV
7. Working environment 0 ~ 50℃ ambient temperature ; 45 ~ 85% non-condensing humidity
8.Power supply 100~240VAC 50-60Hz; Consumption: 4VA
Panel introduction
① PV displaying window To show the present temperature value.
② SV displaying window To show the temperature setpoint and the time setpoint value.
The right low decimal point and the middle time mark points are blinking when timer is active.
When the time arrive, it will show "end" in this window.
③ Function key
Press set to enter LEVEL 1 and LEVEL 2 parameter menus.
④ Shift key, Shift the digit to the bit you want to set.
⑤ Down key; RESET key
Down key: count down values when you change the set point.
RESET key: when the time is up, output is cut. If the user want to restart, press this key 3 seconds.
⑥Up key; TIME key
Up key: count up the values when you change the set point
TIME key: press this key to switch the displaying of time and temperature set point.
⑦ Indicating LED lamp
OUT: light on when the output is active
ALM: light on when the alarm is active
AT : light on when the auto-tuning is active